lchamarthi Posted March 2, 2007 Report Posted March 2, 2007 Hello All, Just I would like to take up Migration projects from NT to NS remotely . I am capable to do the Migration by capturing & understanding the Application Requirements with little Inputs from the Customer. I can communicate over mails & maintain the delivery in time. I hope there is a scope for this and this is the right place to put in to reach everyone. If not I am sorry. But I am expecting a positive sign. Kindly let me know your valuable suggestions & comments. Thanks Devi Quote
tashinz Posted March 2, 2007 Report Posted March 2, 2007 Not sure what you're aiming to precisely. There is a NT somewhere, customer bought an NS terminal, and now you want to give directions to your customer how to do the migration from this working NT to about to install NS? is this the case? first, which NT is installed, which NS has the customer of yours and does he have a software for reading out the NT or does he have a project file for NT? regards Quote
lchamarthi Posted March 2, 2007 Author Report Posted March 2, 2007 I mean, I can develop or migrate the software for their new NS Terminal, if they provide me the Old NT software & can send via a mail. Regards Lakshmi Quote
IO_Rack Posted March 2, 2007 Report Posted March 2, 2007 Please read this post. Scroll down and read a post from PdL. He explains that is can be done but not without some complications. I would imagine you would need something to test your conversion on. To simply receive the old file via email, convert and send it back may be hopeful at best. Good luck. Quote
tashinz Posted March 2, 2007 Report Posted March 2, 2007 If you have a NT file project it's easy. Does your customer has it? if not, does he have a cable and NT support tool to upload the program from NT? when you get the onw file it's easy to convert it to ns project. regards. Quote
ECSI Posted March 3, 2007 Report Posted March 3, 2007 I would say that Lakshmi is just offering a service to anybody out there who is looking for NT to NS conversion. Quote
PdL Posted March 3, 2007 Report Posted March 3, 2007 Thanks ECSI, needed someone to confirm my assumption. There ya go lchamarthi! Quote
lchamarthi Posted March 11, 2007 Author Report Posted March 11, 2007 I do have NS5 Touch Screen Panel & Relevant NS Designer softwares with me for simulating. Also i have NT Software too for viewing the old NT31C Program. The purpose i kept here is, I can do the migration from NT to NS if anybody wants on some quotation basis, also i can improve the HMI Asthetics too.... Thanks Lakshmi Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.