Derickvdw Posted May 16, 2007 Report Posted May 16, 2007 I wonder if there is anybody out there that has ever installed a FR-A5NM option card in an inverter via modbus plus and controller it from a modicon PLC, that I can ask if I have no luck with the one I'm about to install as a test in our plant. I would a manual about it, attach. If some one know more about it please Quote
Crossbow Posted May 16, 2007 Report Posted May 16, 2007 Mitsubishi in the US has this manual on their website. http://www.meau.com/functions/dms/getfile....000000229700000 Quote
Derickvdw Posted May 17, 2007 Author Report Posted May 17, 2007 Thanx for that manual. It's the same one that I have. I have been reading throught it and have an idea of the register needed to read and write to the inverter. Another question. Is it possible to link more then one inverter on a network. And how can I offset the register that is needed for the inverter. This inverter must be added on to an existing network that uses those registers already. More questions. I would also like to have a local/remote funtion on the inverter. Did have a look at the parameters but it's so much that I'm not sure. Any information will help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.