mulderm Posted June 11, 2007 Report Posted June 11, 2007 Hello, I use Wincc Flexible 2005 and an OP73 micro Panel with a Siemens CPU 222. How can I send from the plc a created screen on the panel? Example: When M0.0 is "1" then get screennumber 5 on the panel. I have searching on the manual but can´t find this remote controlled screennumber option. Who knows? Greetings, mulderm Quote
s7xp.com Posted June 11, 2007 Report Posted June 11, 2007 You need to use an area pointer for this kind of operations. Check the manual for area pointers and one of them is to control the screen number. Quote
charlesm Posted June 12, 2007 Report Posted June 12, 2007 http://www.plctalk.net/qanda/showthread.php?t=31389 Quote
mulderm Posted June 12, 2007 Author Report Posted June 12, 2007 The only option for the Area-pointer is the plc Time/Date. No other option is available. mulderm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.