Muhammad Daniyal Posted January 29, 2008 Report Posted January 29, 2008 Dear All, My siemens plc s7-200 has been hanged, it is in stop position if we switch to the run mode then it does nt change thier stat and still stop mode. pls find some better solution for me, however we could run the system rgds Daniyal
Crossbow Posted January 30, 2008 Report Posted January 30, 2008 Connect with the Step 7/Micro-Win software and see what the PLC diagnostics tell you is wrong. There's no way we can offer any more info since we don't know what the program in the unit does or how it is written. The PLC does not have a program at the factory, it's written by the machine builder. You need to be able to connect to the PLC and see if it has an error code, and then the manual for the S7-200 (available here in Downloads or www.siemens.com/s7-200) will tell you what causes that error and how to fix it.
Muhammad Daniyal Posted January 31, 2008 Author Report Posted January 31, 2008 Thanx Crossbow, i follow the advice u have quoted. again thanx best regards
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now