Guest Dipsie Posted February 23, 2004 Report Posted February 23, 2004 Hey, I need to write a program in S7 scl that sends sms messages with a gsm-modem when a alarm signal is coming in at the plc. If after 5 min the person who had recieved the sms didn't respond with a sms then the modem must send a new sms to the next person in the DB. I don't know how to begin, it's the first time that I use scl. I hope you people can help me. Greetz, Dipsie Quote
Sleepy Wombat Posted February 24, 2004 Report Posted February 24, 2004 Hey Dipsie,,, Sorry i havn;t used the S7 with a GSM but i have with an Omron PLC with a Falcom GSM. I have uploaded a sample program and Setup Notes. At least this might help with the GSM setup.. Regards Matt Link to download section Quote
Guest Zxc-SLO Posted April 1, 2004 Report Posted April 1, 2004 I have such a program for S7 and Siemens GSM modem TC35t in SCL. It's very short SCL block and simple. You can send and receive SMS messages with no problem. Mail me on zxc_slo@hotmail.com and I can send it to you. LP Quote
MichaelM Posted February 11, 2006 Report Posted February 11, 2006 Hi, It is easier and more powerful to buy a software product that will do the job. You may use U.C.ME-OPC software (see: http://www.controlsee.com ) U.C.ME-OPC may be connected to any OPC or DDE server and send alarms via Phone(voice), SMS, email, Fax, Multimedia and more. Michael. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.