Need to source this adjustable roller arm microswitch

[Agrajag]

Does anyone know where I can find a limit switch like the one in the attached photo. Dimensions for the switch body match most microswitches except the arm can be adjusted. Standard roller arm microswitches won't work because the roller is too close to the switch body. I'm open to other creative solutions, but please KISSir. Bending standard roller arm switches has been attempted, but I believe that the bend is relaxing over time and causing equipment problems. Markings: 5/250~ 50E3 T100 (specs?) ENEC logo 5A125-250VAC/10HP R56 1050 also includes a backward R followed by an A, an SA enclosed in a mostly complete circle, and a very curvy m (like mcdonalds arches but with a larger radius and lower case) within a circle that has a switch symbol connected at the very bottom of the circle If nothing else, please elaborate on what these marking may mean [i am aware that it is a 5 amp 125-250V switch, so spare the basics] Edited February 24, 2010 by Agrajag

[Mickey]

This comes up from Google http://www.szbeifang.com/english/product-1.asp?id=85

[Agrajag]

Ack... I guess this was a google misuse on my part: http://lmgtfy.com/?q=1050+series+microswitch. Thank you very much. I believe I found something I can use.