Siemens (TI) 575 PGTS / subroutine

[tommu56]

I’ve read the book but I am missing something I have a PGTS with the following # in them Box PGTS 4 IN1 : C2 IN2 : C935 IN3 : C1679 IN4 : C1769 IN5 : C18301 IN6 : C2 IN7 : C18401 IN8 : C18402 IN9 : C18004 IN10 : C18005 IN11 : C18404 IN12 : C18405 IN13 : C18542 IN14 : C18544 IN15 : C3231 IN16 : C2 IN17 : C2 IN18 : C2 IN19 : C2 I020 : V6199 It go’s to subroutine 4 C2 ----------[ / ]---- MIRW ---------(17160) IR : B1 A : V20 N : 16 Other PGTS’S use same sub routine Were does the result of the MIRW go to? Edited April 27, 2011 by tommu56

[tommu56]

The manual is a little deceiving it mentions IO in the lower section but all the bit's the image says IN:XX in every position and that is were the result go's to were the IO:XX is Looking at the program the last line has the IO:20 is were the result is put in this case it is V6199 tom Edited April 27, 2011 by tommu56