How to Use GX IEC Config QJ71MB91

[tid_chai]

hello i have PLC Mitsubishi Q04U and QJ71MB91 i want use Modbus connect to Inverter Hitachi X200 i use Intelligent function module utility config Module QJ71MB91 because i not see QJ71MB91 in list why i not see it ? if i want add QJ71MB91 to list i can or no? please For example config and program in GX IEC Thank you No.bmp Edited June 22, 2011 by tid_chai

[Crossbow]

Install GX Configurator-MB and you will be able to configure it.

[kaare_t]

In your picture: You need to set up an Intelli. Card in PLC Parameter -> I/O Assignement to be able to configure the card via GX Configurator MB

[tid_chai]

i use Gx developer V8.78 GX Configurater-MB V 1.03B Devlop PLC Q04UDH i Follow you but not configure because The original problem please Configure and send Project file to me thank You kaare_t Config.bmp Edited June 22, 2011 by tid_chai

[kaare_t]

I don't have the GX Configurator MB package installed, but your problem is that you have an old version of GX Configurator MB (your version does not include QJ71MB91). You should contact your local rep. and ask for an upgrade of the GX Configurator MB package.

[KAZAH]

Edited June 23, 2011 by KAZAH

[KAZAH]

[tid_chai]

Thank KAZAH And All For Data now i cannot config hardware please see Problem in Image Config2.bmp Edited June 26, 2011 by tid_chai

[KAZAH]

use other versions of GX CONFIGURATOR MB Edited June 26, 2011 by KAZAH

[tid_chai]

Please give me ? for gx configurator(support version)

[KAZAH]

[Crossbow]

You need to contact Mitsubishi for this. nobody here can 'give' it to you legally.