Crossbow Posted January 28, 2012 Report Posted January 28, 2012 Anybody else get to use GX Works2 version 1.73 yet? They added a really nice and simple graphic tool to build and configure CC-Link networks. It's also in the latest MELSOFT Navigator. So now you just drag and drop modules from the list into the network. It know the configuration (remote I/O, remote device, intelligent device) and the number of stations. Has all the Mitsubishi parts loaded, and generic modules for the others. Quote
KAZAH Posted January 29, 2012 Report Posted January 29, 2012 all is not well.In general, this is the progress. Quote
autoexecncf Posted February 23, 2012 Report Posted February 23, 2012 Is there much difference between GX Works2 version 1.73B and the last major release GX Works2 1.64S (that is to say any added functionality)? Quote
KAZAH Posted February 23, 2012 Report Posted February 23, 2012 the difference is significant. I recommend. Quote
autoexecncf Posted February 23, 2012 Report Posted February 23, 2012 I have it on the way. Many thanks for the advice. Quote
Crossbow Posted March 1, 2012 Author Report Posted March 1, 2012 Not released over here yet, at least I haven't gotten an email... Quote
autoexecncf Posted March 13, 2012 Report Posted March 13, 2012 I concur. Haven't seen it here in the states. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.