S_Ghm Posted February 13, 2012 Report Posted February 13, 2012 good evening I have this project at uni and that is to design an SFC programme to control a 24 volt motor that running in a washing machine i understand the SFC concepts but I can't figure out how to work out the software I know that each steps is related to a transition and an action associated. all i want from any one please is to teach me through 2 steps and a transition between them including how to write those 2 blocks in ladder logic. that would make me able to understand how to assemble the whole software I use GX developer 7.04 for a FX1N PLC thank you, if any one want to contact me regarding this matter please do not hesitate to email me on Salmangmd@gmail.com Quote
kaare_t Posted February 14, 2012 Report Posted February 14, 2012 I found this example on Beijer website. It's in Swedish, but I think it will be enough to show you how to perform steps/transitions.... http://www.beijer.no...12578710034C221 1 Quote
Crossbow Posted February 14, 2012 Report Posted February 14, 2012 GX Developer or GX IEC Developer? If GX Developer, 7.04 is ancient. Current is 8.101. Quote
S_Ghm Posted February 16, 2012 Author Report Posted February 16, 2012 it is GX IEC Developer sorry for that. Quote
S_Ghm Posted February 16, 2012 Author Report Posted February 16, 2012 THANK YOU THANK YOU THANK YOU My friend, that is exactly what i was looking for,.. i really thank you for this gift Quote
Hohner Posted February 23, 2012 Report Posted February 23, 2012 May be it will be helpful: http://www.scantime.co.uk/_docs/Mi/SFC%20Prog%20manual.pdf Quote
kaare_t Posted February 23, 2012 Report Posted February 23, 2012 That manual is for GX Developer and not GX IEC Developer, but it's nice to see the contribution Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.