dsc Posted February 17, 2012 Report Posted February 17, 2012 Hi Guys, A short question. To go online with Q02H cpu, can we use normal usb cable to the onboard cpu port? I have try and it is not successful. Is it something to do with Transfer Setup at GX Developer? Thanks Azad Quote
kaare_t Posted February 17, 2012 Report Posted February 17, 2012 Take a printscreen from your transfer setup... Can you see the Q02H in the device manager??? Quote
Gambit Posted February 17, 2012 Report Posted February 17, 2012 (edited) Make sure USB is (not rs232) selected at "PC side" in the transfer setup. Edited February 17, 2012 by Gambit Quote
Crossbow Posted February 17, 2012 Report Posted February 17, 2012 And make sure the USB drivers get installed properly when you connect the cable. If the driver isn't installed, it won't communicate. Quote
dsc Posted February 18, 2012 Author Report Posted February 18, 2012 Thanks Guy for the help and once I install the driver for Mitsubishi Easysocket driver and the driver at C:\Melsec\Easysocket\Usb driver. Azad dsc Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.