zachlj1 Posted September 20, 2012 Report Posted September 20, 2012 We’ve been looking at a few SCADA type systems and are looking for a potential resource to make use of our current HMIs for this. Basically what we’d like to achieve is: • Alarm detail logging – operator makes selection after generic alarm is fired • Pro server trigger event logging to SQL database o Temperature/humidity of our curing chambers o Strapping machine fault o Rotary advancement time stamp • Production statistics – shift, operator, changeover time, ect (see attached image) This whitepaper from pro-face really lays out the basics of what we’d like to achieve: http://www.profaceamerica.com/admin/cms/resource_library/files/0aa34374b79c9d18/pro_face_oee_whitepaper052311.pdf We aren't set on going this route and would be open to alternative suggestions. The work could be performed remote and the hours are flexible. Please contact me with your experience in this area if you are interested. Quote
JRoss Posted September 21, 2012 Report Posted September 21, 2012 I'm assuming from the white paper that your "current HMIs" are Pro-Face, but it would be helpful if you could confirm or deny that. Also, what is your location? You indicated the work can be done remotely, but it's nice to know the end location. Quote
zachlj1 Posted September 24, 2012 Author Report Posted September 24, 2012 Yes, we currently have Pro-face HMIs. Our facility is located in Okeechobee, Fl. Quote
JeffKiper Posted September 29, 2012 Report Posted September 29, 2012 Are you looking fir someone to travel or local? I may be willing to look at it if you need a traveler. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.