alana Posted April 15, 2013 Report Posted April 15, 2013 (edited) I have the following module in my system: Honeywell Analog Output Analog Output 4-20mA Model: TC0AH061 Cat Rev : G01 Part # 96978277 A01 F/W Rev 1.9 Ser # 0008E75B When I powered down the chassis & re-established power again, all the channels on the module was only sending out 2.89mA. I had to re-load the points that are on the Analog Output card for it to be functional again. This has happened in the past already. Is there any explanation for this? You could also send response to alanabaptiste@yahoo.com Much Thanks Edited April 16, 2013 by alana
alana Posted April 30, 2013 Author Report Posted April 30, 2013 Could it be the behaviour of this module when power is removed from it. Please advise.
alana Posted May 18, 2013 Author Report Posted May 18, 2013 Any possible cause for this error when power waas removed from the rack with the AO module?
TimWilborne Posted May 18, 2013 Report Posted May 18, 2013 Hi alana You posted this under Allen Bradley. I'll move it to the General Topics to see if it gets you any attention.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now