shithun Posted July 1, 2013 Report Posted July 1, 2013 Hi, I have CP1E-N30DT1A(Source type) and Panasonic MDD T5540 servo with me. How to interface PLC to servo using pulse controlled method. Since the PLC is source type whether pulse controlled methos will work out or not? Please check the attachment.
ParaffinPower Posted July 3, 2013 Report Posted July 3, 2013 Hello I'd connect pins 3 and 5 to the CP1E's pulse output terminals (via 2K2 resistors), and pins 4 and 6 to 0v (same 0v as the plc). Pp
shithun Posted July 6, 2013 Author Report Posted July 6, 2013 In my case, I have to connect two PANASONIC servo drives to one CP1E PLC. SO I have configured this manner. Pin1(servo) ----> q100.0 Pin4(servo) ----> 0V Pin2(servo) -----> q100.1 Pin6(servo) -----> 0V I have tried this config but it's not working. Please guide.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now