Where to find S7-200 PLC model and parts from the Uploaded program

[Kenwei8011]

Hi all, Is it possible for me to find out the hardware used from the uploaded S7-200 PLC program? e.g. EM277 profibus module, PLC model etc.. I'm using STEP7-Micro/WIN software to open the program file. Thanks. Ken~

[IamJon]

Not sure how different the layout is between 200 and 300, but in S7 manager, you click through the project in the left window and you'll get to a section called "hardware." Double click this to open the window that shows your rack layout. I've never used 200 or S7-Micro, but I hope this helps. I only responded because I know the Siemens forum can be slow here.

[Moggie]

Only the PLC Type -

[Kenwei8011]

Thanks for your reply. I understand that s7 manager can read all the info of the modules using in the project, but I just couldnt find in s7 micro.

[Kenwei8011]

Hi Moggie, Meaning that i can only get the part numbers by checking the physical product on site? Anyway, I've asked my client to copy down all the part numbers for me. Thanks.

[Homer_BL]

You can see modules only when ONLINE. You can see if there are some special modules also looking in DBs and SUB crreated by various Wizards.