FX3U-ENET-L Setup problems

[C.H.]

HI! I have an Mitsubishi FX3U-32M with the ENET-L connected to the right side of the PLC. The PLC detects the ENET-L module in FX-paramertes, in GX Works 2. The problems apers when FX Configurator connects to the ENET-L, then I get this Message: "The module witch supportedthis function is not found. Please execute again after confirming the module" The PC is connected to the PLC with USB to RS422 adapter. Any suggestion on how I can configurate the ENET-L module?

[KAZAH]

FX3U-ENET-L a configurator is necessary to you.the FX3U-ENET-L module differs from FX3U-ENET