letranlong Posted September 18, 2014 Report Posted September 18, 2014 (edited) i have a question for you help me in company have a few types plc mitsubishi, but there is a plc FX2-32MT TRANSISTOR, it is lost the program and lost data I have a folder, in folder contains some of the programs plc, I don't know plc program FX2-32MT where. can you check help me can you can find plc program FX2-32MT? contains in folder here https://www.dropbox.com/s/t0rbqbd6omfmtmj/mitsubishi.rar?dl=0%7C this is here, contains all types plc mitsubishi https://www.dropbox.com/s/snkm56d0kt0ddrr/lknj.rar?dl=0 thanks you again Edited September 21, 2014 by letranlong Quote
Edwin Posted September 21, 2014 Report Posted September 21, 2014 https://www.dropbox.com/s/t0rbqbd6om...ishi.rar?dl=0%7C above link is error. Quote
letranlong Posted September 21, 2014 Author Report Posted September 21, 2014 (edited) dear Edwin thank you helping I send a link again to you please you checking help you, so I new find understand plc mitsubishi so I can't know program of FX2-32MT, it's canained where in fodel below here please you help check again https://www.dropbox.com/s/t0rbqbd6omfmtmj/mitsubishi.rar?dl=0| Edited September 21, 2014 by letranlong Quote
letranlong Posted September 21, 2014 Author Report Posted September 21, 2014 dear Edwin long times no see how are you today me have a question want you would like helps I use software GX DEV (ver 8) I have a machine data lost all program, and i want download plc program again, but I don't know download memory to plc how, when I download program to plc but plc do not operation, follwing I think plc need download memory to plc company of me use types plc FX2-32MT please. can you help me can you showed me the ways download memory to plc how??? Quote
Edwin Posted September 21, 2014 Report Posted September 21, 2014 The program are in "Vamatex_Inverter" folder, but there are few versions of programs. you need to confirm which one is the latest program. Download procedure: 1. Online--> Transfer setup-->Set the correct com port and connection test--> if successful then 2. Online--> Write to PLC--> Select the program + Parameter then execute. Quote
letranlong Posted September 24, 2014 Author Report Posted September 24, 2014 thank you so much for your time and consideration. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.