the engineer Posted February 12, 2015 Report Posted February 12, 2015 Dear all , i have to know the ladder logic for bottle filling system, if the tank is empty the sensor will detect and sends the signal to the plc after that i have to open the valve for water filling in the tank , after tank gets full level sensor detects and sends the signal to the plc , now i have to close the valve . so how can i write the program for these functions? NOTE : Above mentioned all were automated not by manual . please give me some ideas or program. with regards , engineer Quote
RussB Posted February 12, 2015 Report Posted February 12, 2015 Most Engineers get paid for this. Around here the average is about $97.88 per hour. I would guess that what you want will be in the vicinity of 10-67 hours, depending on diagnostics needed. Maybe someone will volunteer to do the math for you? Quote
Crossbow Posted February 12, 2015 Report Posted February 12, 2015 Sounds distinctly like a programming lab in a college class. Give it some thought and post your ideas, then people will comment on it. It sounds like a simple latching circuit to me. Take about 30 seconds to write. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.