amor.wael Posted April 22, 2015 Report Posted April 22, 2015 Hi guys, I am new to Omron PLC programming. Do anyone know how to use the analogique input/ output ? Quote
Mendon Systems Posted April 22, 2015 Report Posted April 22, 2015 (edited) Which PLC are you using and what analog module? Edited April 22, 2015 by Mendon Systems Quote
amor.wael Posted April 22, 2015 Author Report Posted April 22, 2015 PLC : CP1L UC = L module : CJ1W-AD041-V1 Quote
pfort Posted April 22, 2015 Report Posted April 22, 2015 (edited) I suggest you read the manual first (section 7), then come with more specific question. http://forums.mrplc.com/index.php?app=downloads&showfile=855 Edited April 22, 2015 by pfort Quote
Michael Walsh Posted April 23, 2015 Report Posted April 23, 2015 You cannot use a CJ1W-AD041-V1 with a CP1L PLC. The only CP1 that supports CJ1W modules is the CP1H. Quote
Mendon Systems Posted April 23, 2015 Report Posted April 23, 2015 I suspect that he really has a CP1W-AD041 module, or at least that is what he needs. Quote
Michael Walsh Posted April 24, 2015 Report Posted April 24, 2015 I thought that he might have that as well, but the fact that he has a -V1 on the end made me think that he might actually have the CJ1W card. I should have mentioned the CP1W version as you did though. Quote
Mendon Systems Posted April 24, 2015 Report Posted April 24, 2015 Yeah, good point. The -V1 probably means he's got a CJ1W card. Dunno why he would do that unless he's trying to build a system with left over parts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.