Omron<-->Bosh Rexroth Ethernet/IP

[FrankA]

Hi, I'm trying to set up communication between a cj2m plc and an indra drive servo driver from bosch rexroth over ethernet/ip. Tried following a youtube video from rexroth explaining how simple this drive is to set-up with a 3rd party plc.... I have no experience with ethernet/ip, but what the video describes, i can't seem to do with omrons network configurator. more specific info on my equipment. Indra drive: HCS01.1E-W0013-A-02-B-ET-EC-NN-NN-NN-FW Firmware: FWA-INDRV*-MPB-17VRS-D5-1-NNN-NN PLC: CJ2M-Cpu31. rexroth info says there is no eds file for this firmware, i have to use a generic ethernet module, and set up from there. I've tried everything i can think of and implemented all googled info i've got to no effect, can't get communication. Any help getting this drive running is very appreciated. Thanks, Frank Edited July 5, 2015 by FrankA

[FrankA]

Attached is a pdf with pictures of various settings for the ethernip/ip connetion, hoping that someone will spot a simple error... Dokument1.pdf