hakjaf Posted July 7, 2015 Report Posted July 7, 2015 (edited) As the topic say i want communication between a A2AS with profibus master A1SJ71PB92D and a SIEMENS node IM151-1 STANDARD (6ES7151- 1AA05-0AB0). I use MELSOFT GX Configurator-DP Version 7.10L. But my problem is that my node is by default DPV1 and my master dosn´t work with DPV1, the master wants DPV0. Is there any way to change so my node is DPV0? I have tried to change in the slave parameter Hex code a litle but i don´t understand it so much. what i did was to change the first byte from 00 to C4 cus that was what the siemens support said. The GSE file im using is si04806a.gse Edited July 7, 2015 by hakjaf Quote
Bryll Posted July 9, 2015 Report Posted July 9, 2015 The manual states that the default mode is DPV0 unless you select the DPV1 mode. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.