onboardx Posted January 13, 2016 Report Posted January 13, 2016 Hi. I want to write program that bit of M0 will be ON 800 ms and then will bee OFF 200ms. How can I write this program?
Ron_S Posted January 13, 2016 Report Posted January 13, 2016 Which model of PLC? Timers are different on each model.
panic mode Posted January 13, 2016 Report Posted January 13, 2016 0.8sec + 0.2sec = 1sec..... 1st line: make 1s clock using timer that resets itself 2nd line: compare timer accumulated value with limit of your choice (say 800ms) and drive coil with M0
onboardx Posted January 13, 2016 Author Report Posted January 13, 2016 Can you show the ladder of this program?
panic mode Posted January 14, 2016 Report Posted January 14, 2016 exactly.... here is same thing but written a bit differently 1
Akahige Posted January 15, 2016 Report Posted January 15, 2016 On 1/14/2016 at 7:36 AM, panic mode said: exactly.... here is same thing but written a bit differently I like it! Save on the steps and concise and to the point. I am going to have to "borrow" this on my next go around.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now