What is Error 70 on R88d-KN20H-ECT servo drive

[pritish]

I am using 50 Omron make ethercat servo drives with NJ controller,but 1 servo drive displys error "70", Servo drive user manual does not include error "70" in troubleshoot section.Is any one knows about what is error"70"? and its cause and how to correct it. Please mail me on gaik.pritish.@gmail.com.

Edited September 29, 2016 by pritish

[innoaloe]

Mailed to you, but better if we keep discussion here.
 

I also never saw Error 70 anywhere in the manual, but managed to find some separated documents for Accurax G5, mentioning these :

Whether its 70.0 / 70.1 / 70.2, you can check using NJ-Troubleshooter

70.0 or 70.1 should be related to wiring. Maybe you got looses connection from the Servo Motor Power Cable to the Drive

Edited October 5, 2016 by innoaloe

[himanshuKamboj]

If error other than described in manual occurs , the reason might be the control circuit fault of drive or malfunctioning.