MR-J4-B operation mode alarm E7.1

[Bijusi]

Hi every body!

Please help me explain why servo amplifier claimed a error code E7.1. I checked again and again but I cannot find out where is the error source. Here is the capture screen. Thanks in advanced

[Gambit]

Are you setting up a new system or is this an existing system. Because you have a forced stop signal. 
Is the forced stop signal wired to the amplifier or the motion module?

[Bijusi]

Thanks Gambit. That is a new system. The problem was solved by wiring the EMI connector of the motion module to 24V power.