datalink - Etehrnet send recieve CJ2M Cpu

[Chickenkiller91]

Hi guys.

I have 1 cj2m cpu33 reciving 3bits of info from 3 other plcs (all similar type cj2m cpu 34-33)

The problem is that 2 bits are ariving the third one is not. See the pictures i uploaded:

 

I do not know these instructions, in the other cases it was working. However i noticed that the output plc had a different adress with D950. I changed the adress to D804 as you can see on the pictures but still not reciving the data. 

I guess i will have to configure somwhere else also.

All i found (https://www.myomron.com/index.php?action=kb&article=1416) on internet that i have to open this datalink tool from the integrator. When i actually do that of course i just get an error: FATAL Error. Cannot read the file.

 

How can i make this work? Is the other way to constantly send this one bit with ethernet? Any sollutions, advices are welcome!