Simple data logging software

[Belve]

Hello, I'm looking for a simple data logging software, something that doesn't require any programming skills. Thank you!

[arj3090]

What are you logging? Data from a PLC? Or raw analog voltages/current?

[automationtechie]

We have a software package called EZ Datalogger.  It is free to use for up to 64 tags when you use one of our Data Acquisition modules.  A license can be purchased if you have your own DAQ modules or if you have more than 64 IO tags. 

EZ Datalogger runs on a Windows PC and can communicate to most Modbus TCP and Modbus RTU devices. 

Our Modbus TCP selection guide can be found at the following link:

Modbus TCP Data Acquisition Modules

The steps for data logging are:

1) Configure your Modbus TCP slave IP address for your network

2) Configure the IO channel types and verify data is read properly using Web interface

3) Install EZ Datalogger on your PC

4) Create a Modbus TCP connection to your DAQ device by entering the IP address of the Slave

5) Add your Modbus TCP slave device by selecting the Model or entering the Modbus register types and counts

6)Add channels which you would like to be stored in Data log to the channel list

7) Adjust sampling period and data log storage path if necessary (sampling period is 1 second by default and a new file will be created every 24 hours

8) Click on start to begin data logging.

If we can answer any questions, please feel free to contact us at tech@icpdas-usa.com