Mitsubishi E600

[pv550]

Hello,

           I have a problem in mitsubishi E600. The problem is when power on the hmi it is stuck in booting screen (i.e booting file system). so, i wanted to update the firmware in hmi. how to update the firmware. Please explain...

 

[kraykov]

Maybe you are considering Beijer's HMI E600. What software do you try to load the new firmware?

[kaare_t]

You need to contact your nearest Beijer Electronics department to get the firmware loader and file. Check out their website:

https://www.beijerelectronics.com

[pv550]

I dont know the software to update firmware.please tell which software can i used to update the firmware.

[kraykov]

These HMIs are programmed with an E-designer. I'm not sure what version your terminal supports.
You can try with v.7.30 or 7.52. This software can also be updated with firmware HMI.

Edited August 23, 2017 by kraykov

[CJ2M2016]

You can update the firmware in HMI with E-Designer v. 7.52 .

 

E-Designer_for_E-series_English.pdf

 

•  
•  

[kaare_t]

@CJ2M2016: Are you providing these software packages listed in the website (http://www.isansanat.ir/portfolios/mitsubishi/mitsubishi-electric/) free of charge? Please note that publishing and/or sharing installation codes and software packages that are supposed to be paid for is not allowed in this forum, and you will get warnings/banned for doing so.

[Crossbow]

I removed the download link.  Do not share links to illegal software or you will be removed from this website.