Need TIMER logic support CJ2M

[SSK]

I am using CJ2M PLC.I want switch on a output for certain time by a timer and holding bit if interlocks satisfied.If interlock not OK timer has to hold the time and output should be off. if again interlocks OK again output has to ON upto balance time completion and has to give timer done output for reset holding bit.please suggest.

[Jay Anthony]

Use CNT instead of TIM. Use 0.1 second clock to count seconds.

[SSK]

Thank you Jay i will try and reply.Please reply about can we use MTIM for this requirement I have tried MTIM getting reset and again running cyclical.

[SSK]

Thanks Jay.Problem solved and machine working fine.