ss3018 Connectio PLC, HMI, MODBUS, and Thermocouple

[diraemon]

hello everybody, can anybody help me?

I have PLC= Q03UDVCPU, HMI=  HAKKO-FUJI electric V9100iC, Modbus sielco= SS3018 and thermocouple Type K.
I want to making trend in HMI cotinuously with TC type K and modbus SS3018. I attact what connecting I have to do.. but I dont understand what should I insert address in configuration trend on HMI. I've checked address with modbus poll (SS3018 with uport rs485 to TC type K), and I get address number 14 which stored the data result of temperature..
what should I setting for connected the TC to HMI?

 

Edited October 25, 2018 by diraemon

[gclshortt]

https://americas.fujielectric.com/files/V9_Reference1_E.PDF

Real Time Trends must read from consecutive channels in the PLC. Historical trends must be logged on a server or local storage and then viewed.
Please see the manual above under Trends.

This may help you out.
Regards,
Garry

[diraemon]

On 10/25/2018 at 9:12 PM, gclshortt said:

https://americas.fujielectric.com/files/V9_Reference1_E.PDF

Real Time Trends must read from consecutive channels in the PLC. Historical trends must be logged on a server or local storage and then viewed.
Please see the manual above under Trends.

This may help you out.
Regards,
Garry

thankyou mr garry..