M241 not seeing CanOpen VW3A3608

[kmacriver]

I have an application with a VW3A3608 communicating with a M241CEC24R. I've connected the two together with a CAT5 cable and connected CAN_H to Pin1, CAN_L to Pin 2 and CAN_Gnd to Pin3. The rest of the Pins unconnected. Running SoMachine 4.3 with all the updates. Terminated on the PLC with the switch and at the Drive with the RJ45 proper terminating jack. The ATV320 is setup as Fr1=CanOpen and Communications is setup with the proper node address. Any help appreciated.

 

Edited May 10, 2019 by kmacriver