PrecisionPLC Posted August 4, 2019 Report Posted August 4, 2019 Wondering how to write a safey program for ms6-SV- e festo safety dump valve that's has 2 enable signals.. safety program isn't finished so want to get valve to pressurize so I am able to test valves out in the field by forcing then on and checking feedback etc Using sysmac studio and I'm new to the world of automation Thanks Quote
panic mode Posted August 5, 2019 Report Posted August 5, 2019 why not put on scrubs and gloves and start performing surgery? in both cases human lives are in danger but medial field tend to pay better... honestly, i would say, should not be getting near tasks that involve safety unless watching over the shoulder of someone experienced. Quote
Crossbow Posted August 6, 2019 Report Posted August 6, 2019 I agree with Panic Mode. Don't touch the safety until a qualified safety programmer has written and tested a program. It's not as simple as working with a regular PLC. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.