SEIMENS step 5 cpu 103

[korben13]

Please see attached and help me convert this STL into ladder. I think I did it right just want to check.

MX-4070v_20191025_132146.pdf

[Joe E.]

I'm not an STL expert...

I made a new project added a blank program. I entered your code into it in STL and had it convert to LAD:

 

Edited to add:

I'm using Simatic Manger for the S7-series processors, not S5. The "F" registers yours uses aren't available, so I used 'M' instead.

Edited October 25, 2019 by Joe E.