Input on the left vertical line

[Gman1]

Hi!

I have a question about programming. I want to place an input (X01) on the left vertical line, to allow the rest of the program running by an external switch. How can I place an input like that? I work on Gx works2 and using an Fx3g Plc

(I used it once, but i can't find that program.)

Edited January 28, 2020 by Gman1

[drforsythe]

Look into the MC and MCR commands.  Those are the Master Control and Master Control Reset commands.  They will essentially allow you to enable a whole block of logic that is contained between the MC and MCR. 

[WattUp]

| X0 | ----- [MC n1 M0]

Stuff to run when X0 is on..

---------------[MCR n1]

Stuff that runs all the time