grubb Posted May 22, 2020 Report Posted May 22, 2020 Hey all - I am stumped and looking for some assistance. I have a project in studio 5000, v.32 where I have some ABB drives that are not recognized. I've installed the EDS files, exact same one my co-worker besides me did, and mine will not go recognized and it is driving me crazy! I've done it while online with the PLC and offline, still to no avail. I've also installed the EDS files by going through Tools>EDS Hardware Installation and by right-clicking on the ABB drive in the controller organization tree and registering EDS file. Thanks for any assistance, -k Quote
TimWilborne Posted May 22, 2020 Report Posted May 22, 2020 Try deleting your Harmony files. See video below. https://www.theautomationstore.com/troubleshooting-rslinx-browsing-programs-caused-by-harmony-files/ Quote
grubb Posted May 23, 2020 Author Report Posted May 23, 2020 Thanks @TimWilborne, I'll be giving this a try and get back to you! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.