Otto Automation Posted August 16, 2022 Report Posted August 16, 2022 Hi, I was wondering if anyone knows where I can get the configuration software or the manual for Siemens Moore 352 and 353 digital loop controllers? I would be willing to purchase the software if anyone has a copy. Thank you. Quote
pturmel Posted August 16, 2022 Report Posted August 16, 2022 Huh. I used those a few decades ago in a paper mill and didn't know there was software to configure them. Did it all with the built-in menus. Quote
pturmel Posted August 16, 2022 Report Posted August 16, 2022 Found this link to a manual: https://cache.industry.siemens.com/dl/files/227/27775227/att_59300/v1/UM352P-1_r6.pdf Not sure which version you are dealing with. Quote
Otto Automation Posted August 17, 2022 Author Report Posted August 17, 2022 Thank you for the reply. Yeah, these do have configuration software. They are named differently for moore 352, 353, 383, 351 etc...Each software being specific to the model controller. 353's use the Iconfig software. The link you sent is for the 352 plus manual. It seems to be the only one I ubkicly available. I need the 352 mycro manual, which seems hard to find. Thank you for your response. Quote
Otto Automation Posted August 17, 2022 Author Report Posted August 17, 2022 Publicly available* Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.