Ramkumar Posted March 27, 2024 Report Posted March 27, 2024 Hi, I would like to automatically close the VNC viewer connection, which is used to view the GOT2000 HMI remotely. Very interested to know if any options are available. Thanks in advance !!! Quote
VeeB Posted March 27, 2024 Report Posted March 27, 2024 it looks like it can be set in the GT designer 3 software: GOT Setup, Advanced Setting Quote
Ramkumar Posted March 28, 2024 Author Report Posted March 28, 2024 Hi VeeB, Thanks a lot for the response ! It was highly helpful. Please let me know of the disconnection shall be triggered from the HMI if we want to disconnect the VNC clients...? Quote
VeeB Posted March 28, 2024 Report Posted March 28, 2024 This setting is for the GOT, The GOT will disconnect the VNC client after the last operation from the VNC client. Enabling an other user to connect. Quote
Ramkumar Posted April 3, 2024 Author Report Posted April 3, 2024 Hi VeeB, I set the "Guaranteed Time" to 60 seconds and expected the VNC connection to close. Waited for more than that time and the connection didn`t closed. Kindly advise on this. Quote
Ramkumar Posted April 4, 2024 Author Report Posted April 4, 2024 Hi, please guide on this topic if someone has an idea... Quote
pturmel Posted April 4, 2024 Report Posted April 4, 2024 I'm going to guess the time setting isn't a way to force the connection to close. It may not be possible. Quote
Ramkumar Posted April 7, 2024 Author Report Posted April 7, 2024 Thanks a lot for the response sir ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.