LuisGonzalez Posted July 9, 2024 Report Posted July 9, 2024 Hello everyone, I'm encountering difficulties communicating with a QUINT4-UPS/24DC/24DC/10/EIP unit. Here's what I've done so far: Set the rotary selector to PC Mode. The NET MOD LNK1 and LNK2 LEDs are off, indicating a potential configuration issue. The Alarm status LED is blinking, possibly due to the battery not being fully charged. Despite these steps, I'm unable to establish communication. Any advice on additional steps or configuration adjustments would be greatly appreciated. Thank you in advance for your help! Quote
pcmccartney1 Posted July 18, 2024 Report Posted July 18, 2024 Not to sound obtuse, but have you gone to Phoenix's website and downloaded application notes, eds files, etc.? Have you set an IP address in the device? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.