Servo Press Library

[Covis]

Hello I have project where I will be use EXLAR roller screw and UNIMOTION ball screw actuator like FTP, PNCE for module of servo press with controler NX1P2 and serwo 1S.
I started instaled SYSMAC XR-013 Servo Press Library (https://www.ia.omron.com/data_pdf/cat/sysmac-xr013_p112-e1_2_3_csm1052873.pdf?id=3459)
I have completed, connected and launched an evaluation kit containing a 1S drive and motor, an NX1P2 controller, a PNCE mechanical actuator with a force sensor.
Does anyone have experience using this library?
I am trying to use it, but the OMRON documentation for this library lacks explanations and configuration examples.
I am ready to connect online (e.g. Anydesk) to launch and test some of its functions with someone who knows this library.

WBR,
COVIS.PL

[Covis]

Hello,
I just got around to getting the servo press functionality up and running using the Omron SYSMAC XR-013 Servo Press Library.

Assumptions

The main goal is the modularity of the servo press system, which allows for the construction of both a stand-alone individual device and the installation in a complete machine or production line, as one of its functional parts, e.g. an element pressing station in an assembly machine with an automatic rotary table.

In addition, the use of a ready-made control system eliminates the need to program the technological functionality of the servo press in the machine or production line controller. We parameterize data exchange via a communication interface, e.g. Profinet, Ethernet/IP, Modbus and I/O (StatusWord, ControlWord, Data).

If anyone is interested, they can contact me.

Below is a link to my video, where I show some basic servo press functionalities.

https://www.youtube.com/watch?v=hWwSQRoh2ZY
https://www.linkedin.com/feed/update/urn:li:activity:7262172603165929473/
http://www.covis.pl

 

Edited November 23, 2024 by Covis