Squirrel Posted December 13, 2024 Report Posted December 13, 2024 Hello everyone, I currently have 3 NXs102 1> Being my master 2>Being UCA3000 Which works the way seen below. 3>Is the one show below on the HMI showing the "Failed to connect to PLC_UCA4000" This is how I have the 2 other NXs102 talking to the main. Quote
Meph Posted December 13, 2024 Report Posted December 13, 2024 What fw version is on the NX102? Try setting dipswitches 1 and 2 to ON on the PLC. Quote
Squirrel Posted December 13, 2024 Author Report Posted December 13, 2024 (edited) 4 hours ago, Meph said: What fw version is on the NX102? Try setting dipswitches 1 and 2 to ON on the PLC. The problem nx102 version is 1.64.. I didn't even think about dipswitches... Thanks! I'll take a look on monday and see whats up Edited December 13, 2024 by Squirrel Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.