KOSTAS Posted February 7, 2006 Report Posted February 7, 2006 Hello to everyone i am new at this forum and i have some questiions. It is my first time with directlogic32 software. I took with handheld programmer the following code from a koyo direct logic plc and i want to translate to ladder or mnemonic view. Any help it would be great. The code is: STR 0125 OR NOT 0053 AND 0231 AND 0601 0001 TMR 0655 003.0 I dont know what is the dot (.) at 003.0. I thing it is seconds but i am not very sure. I have this question because at ladder view when i want to put a real number i dont know how. THANGS Quote
GerryM Posted February 8, 2006 Report Posted February 8, 2006 I am not sure if this answers your question, but here is another thread that discussed using mneumonics: http://forums.mrplc.com/index.php?showtopic=5665 The 3.0 should be seconds, the standard resolution of a timer is 0.1 seconds. In the software, you would normally enter a 30 to get 3.0 seconds. I assume it is similar with the handheld. Quote
Steve Bailey Posted February 9, 2006 Report Posted February 9, 2006 The Automation Direct DL305 is the same thing as the old GE Fanuc Series One. The manual for the Series One Plus gives a pretty good description of the mnemonics. It can be found in the downloads here: http://forums.mrplc.com/index.php?dlcategory=15 Quote
KOSTAS Posted February 9, 2006 Author Report Posted February 9, 2006 Sorry i put my thangs at this topic: http://forums.mrplc.com/index.php?showtopic=5665 but thangs anyway Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.