goez Posted March 9, 2006 Report Posted March 9, 2006 hi, I want to programm a FX3U PLC, what version of GX devevoper supports this PLC? I have the 8.21 version, but it dont comunicate with the PLC. Quote
swimmy67 Posted March 10, 2006 Report Posted March 10, 2006 GX Developer Version 8.25 supports FX3U PLC. Quote
Crossbow Posted March 10, 2006 Report Posted March 10, 2006 You need at least GX-Developer 8.25B. I've been told, but have not tested, that you can set it up as an FX2N in older versions of GX-Developer and it will download. I don't think I'd believe it unless I tested it and it came up true. Gotta be careful what you hear versus what's in the book. Quote
tmu Posted March 10, 2006 Report Posted March 10, 2006 (edited) Or GX IEC Developer 7 Btw, U can test communication with GX--developer FX demo (1000 step): http://forums.mrplc.com/index.php?autocom=downloads&showfile=526. (40Mb). Edited March 10, 2006 by tmu Quote
ady_kurnia Posted March 24, 2006 Report Posted March 24, 2006 Hi Qoez., Upgrade your GX Developer to upversion 8.25 or 8.28 U can contact me at email : adi_kXspeed.net.id (Change X to @ ) regards Ady Kurnia Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.