JP_TFV1 Posted October 4, 2006 Report Posted October 4, 2006 When I plug the GOT in it is killing power to the rest of the rack. Power supply light stays on, but power to everything else goes down. Any Ideas? Thanks. Quote
JP_TFV1 Posted October 4, 2006 Author Report Posted October 4, 2006 Forgot to mention, we also had to unplug the GOT initially to get power to the rest of the rack. I put the program and parameters in. Afterwards, we plugged the GOT back in, and lost power again. Don't know if this will help or not. Thanks. Quote
Crossbow Posted October 4, 2006 Report Posted October 4, 2006 What GOT? To what rack? Using what cable? Are your GOT parameters set right for the communication to the backplane bus? Are the right drivers loaded into the GOT? We need much more detail to help you out. Quote
waynes Posted October 5, 2006 Report Posted October 5, 2006 Cable..... wrong port in CPU or GOT???? Quote
JP_TFV1 Posted October 5, 2006 Author Report Posted October 5, 2006 GOT - GT15 - 75QBUSL RACK - Q3B-L CABLE - GT15 - QC06B Not sure about parameters. Are those set in GT Designer? If so, where? Thanks again. Quote
JP_TFV1 Posted October 5, 2006 Author Report Posted October 5, 2006 It did have the wrong driver installed. Thanks a lot for the suggestion. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.