Search the Community
Showing results for tags 'cx-one'.
Found 18 results
-
Hello, Was extracting PLC program from a Chinese machine and the comments was shown incorrectly as symbols instead of Chinese characters. The Laptop used does support Chinese Language so why does the PLC program pulled from the machine does not show the comments correctly? -
Hello! I just got an interesting request from a customer, we have a product line that uses C200H PLCs. The cabinets can operate independently or they can be connected to work in a Master/Slave configuration, the C200 PLCs communicate to each other over RS-232 using LR registers. Back in 2015 we redesigned to use CJ2M PLCs and changed the communication to EthernetIP. Now we have a customer who wants to buy a new slave for an old C200H system, so my question is what are my options for communicating to a C200 with a CJ PLC, I don't have much experience with the C200, that was programmed before my time here, in 2000 I think. Thank you!!!
-
DATE Instruction for CP PLCs View File Sample code to set the RTC on a CP PLC. Individual sections can be enabled/disabled. Submitter photovoltaic Submitted 03/12/2021 Category PLC Sample Code
-
-
Hi there! I recently discovered this forum and I find it pretty useful for sharing and learning about PLCs. The thing is I'm trying to make a Stack using the SSET(630) instruction in a CJ2M PLC. Reading Omron's W340 manual I saw that PLC memory address for the different stack channels is represented as "00010000" to "0001000F". So, in order to set the last stack word address as well as the pointer's address, how do you know those values? Or am I just misunderstanding something? Thanks in advance! Edit: Solved, the definition of the stack was wrong!
-
Hello there, I am new to OMRON so need some help to communicate two PLC over FINS. Here are the description of the system... (IO Table image is attached) PLC1- CJ2M-CPU33 IP- 10.113.218.34 SUBNET-255.254.0.0 UNIT NO - 00 (set the dial available on the CPU in HEX) NODE - 22 (set the 2 dials available on the CPU in HEX) PLC2- CJ2M-CPU33 IP- 10.113.218.35 SUBNET-255.254.0.0 UNIT NO - 01 (set the dial available on the CPU in HEX) NODE - 23 (set the 2 dials available on the CPU in HEX) Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to 210. I have tried RECV and ECHRD blocks but didn't succeed yet. Two CPU are connected over ethernet via a industrial switch. Can you help me to achieve data transmission please...
-
Has anyone had issues using the Auto-Updater and Administrative Rights? I am running Windows 10 Pro, 64Bit. I need to update Sysmac Studio from 1.31 to 1.4.....when I run Auto Updater (as Administrator) I always get the error "Log on the PC as a user who has an administrative right when install" and it never makes it past the first module of the CX-One Update. I even gave the issue over to my IT guy and he has absolute full rights to every nook and cranny on my laptop. I was told that I needed to allow the CX-One to updates as well since they share some of the same components. My IT guy even tried to do the "download" and install individual modules of the update and that still didn't work. Currently waiting on callback from OMRON Tech Support, thought I'd pose the question here as well....thanks.
-
In CX-Programmer software, we have the ability to make a bunch of copies of the same rung with the "Address Incrememntial Copy" Function. Does Sysmac Studio have a similar function?
-
Hello Forum,We have a NS15-TX01B-V2 at our Plant in Uganda which we are using with a CJ2M PLC. We want to take backup from the PT to PC using Ethernet but we have not succeeded yet. We have consulted the manuals but they are not very elaborate. Someone here may know the step-by-step procedure we can follow. to achieve our goal. We shall be very grateful.Thank you.
-
Hello guys, I am looking for Cx-One trial version and I am interested in version 9.4. Does anyone have a link where I can download a copy from? Thanks in advance.
-
Hello. I have some issues with starting cx-programmer. It wont start. The start up screen shows, then closes, says that cx-programmer is running, but it is not, it is an empty window. When I look in task manager it says the program uses 0% of the processor, but it uses ram. Do you have any idea of how get the program to start the program again.
-
Hi I have problem with the instalation of CX-One over the instalation it stops and give the message: "Error-3: CX-Server Device Driver(Generic FINS Ethernet)failed to install. Try to install it manually from CDROM (Generic FINS Ethernet Device Driver\setup.exe) at the end of instalation." Then if I go to the CDROM and try this instal manually I got the message about the "Unable to locate CX-server" but CX-server I correctly instal from CDROM with sucesfull finish message. And If I try to start CX-Programer I got the message about missing cdmapi32.dll. So what I can do about this :(
-
Hello. I have a D word number 0-990. I would like to convert it to 990-0. So i need a function which shows me 0, when the D100 is 990, and shows me 0 when the D100=990. And of course for the between values also. Calculating continiusly. Help is much appreciated :)
-
Hello, We have a machine from Taiwan that we are troubleshooting. I pulled the program with comments, from the PLC. It looks like they used a combination of English and i'm assuming Chinese. The problem is that the Chinese is not displaying correctly. It displays as symbols like @, ©, and other keyboard symbols. I was wondering if anybody knows what I have to do to display the comments correctly? Do I have to install a CX-ONE Chinese language pack or a Windows language pack? If I need a language pack, where can I get it and will I easily be able to go back to English when I'm done? I've emailed OMRON but it seems that they are very slow with their support. Thank you for any help in advance. -
Hello guys, I have gotten to a level where I can do a few things with an OMRON PLC. However, there's something that is supposed to be basic by now but I still don't understand it, and I will appreciate your help on this . What is the difference between the D, W and H memory areas of the PLC? And in what instances do I utilise each of them for storage of my data? Thank you.
-
Hello guys, I am happy to be on this forum. I am just starting up with OMRON PLCs. I have been programming SIEMENS PLCs for the last three years. I am quite comfortable with the boolean logic. However, I am struggling with the analogs. I'm looking for an instruction that will help me bring in and scale analog inputs and I am wondering if I'll need to unscale the analog outputs as I send them out. I have tried the SCL instruction but it does not seem to do for me what I need. i need to get a signal wired to the input card and convert it to a maningful value. Plus, advice about how to address analog inputs and outputs would be very helpful to me. Thank you very much, I appreciate.
-
Hi every one i have a problem .2 month a go i have forgotten my password for entering to windows xp (SP3) .i changed my password by using user controilpassword2 now when system want to start omron runtime ,this message will appear " please enter the CD contain CX-one.msi file " my cx-one is Version 2.01 .and unfortunately i haven't it any one can help me ? do you have cx-one version 2.01 ? thank you in advance vazgen
-
Do you need a separate CX-One license for each computer that you want to install it on?
