Search the Community

have a good day! and thanks for reading! this is video when i start program (after 10second the Axis4 move couple of times : https://drive.google.com/file/d/1HNB07ZzH0-lBHFFwaRIhcSGUxp1m0XHz/view?usp=sharing if you see the images that i attached you can see, IF test - afterConverData1 > 0.1 MC_MoveAbsolute4(Axis4~~ ElSE IF test - afterConverData1 < -0.1 MC_MoveAbsolute4(Axis4~~ if the plc run cycle ever 1ms, why that code don't executed every 1ms? example, test - afterConverData1 this condition value go over like 10 or -10 but the condition > 0.1 or < - 0.1 dosen't figure it out to run the code "MC_MoveAbsolute4(Axis4~~)" they just run code couple of times What am i do for this...?

Hello from korea :) i got some problem writing loop code in sysmac studio what i wanna do is simple, running process together with loop if u see the picture that i attached there is IF condition, i want my machine run loop in "if" condition but if i use while loop maybe other process dead right lol? in words... running process, i want my machine check the "if" condition.... What can i do in this case? Do i have to run whole process in loop? is there any way to run loop with Other process keep going.... Thanks for reading!

Hello, CJ2M CPU-32 to IAI motion controller through ethernet/ip I'm working on programming electric actuators to pick up parts from a tray. I will have x (row) and y (column) coordinates that I need to update to move the actuators. So to go through the whole tray I would have to use nested loops. (below what i'm trying to achieve if i was doing it in C++) 6 Rows and 6 Columns, palettizing data rows&columns DWORD (Row1,row2,row3...row6; col1,col2...col6) c++ code for i=0,i++,i<6; rowData = row for i=0,i++,i<6; colData = col execute movement wait for confirmation end end I have a way of doing it but it will require a lot of repetitive lines and typing every step, and I was wondering if there is a way on every iteration to increment the data location instead of the contents. In the picture below you can see the example where the goal is to copy data from D8100 to D8000, then in next step from D8102 to D8000, then from D8104 to D8000 and so on. So far in the documentation I was only able to find how to increment contents. Is it even possible to do what I want to?

Hi everybody,For a while I’ve been wondering, in every plc forum where the use of loops come to discussion I find most people answering that it’s best to stay away from them and that there are better, easier and mostly less scan time demanding solutions out there. Why is that?In my experience they’re the next best thing.Why would referencing data from an array of 40 Dwords using a FOR X:= 0 TO 40 DO loop be any more scan time demanding then the PLC scanning through 40 rungs of statments?Just curious if I’m missing something here. Cheers

Hello, I have 30 recipes(g_Blend_Recipes) and want to search for an item number in the recipes and compare it with what the operator enters on the HMI. The recipes itself is an array and there are 5 item numbers in each recipe. I read about the FSC instruction but did not figure a way out yet. I am attaching a picture of the recipe. Any help would be appreciated.

View File Temperature measurement using Arduino Nano, RTD PT100 temperature sensor and 4-20 mA transmitter Temperature measurement usind Arduino Nano, RTD PT100 sensor, 4-20 mA current loop transmiter, and a python app for visualization Submitter Absolutelyautomation Submitted 04/01/2016 Category Other PLC Demo Software  

Is it possible to run some sort of PID operation on OMRON PLC without PID or PIDAT instruction? I need to modify a program and although it seems that they use PID loop to control temperature I can not find PID or PIDAT instruction anywhere in the whole program. Can they put the instruction somewhere where the find function would not see it? Also what is this instruction --|| |--? I looked through the instruction manual but did not see one like that in there so what is it?