Search the Community
Showing results for tags 'nx-series'.
-
Hi, I have a reset button for a safety function, and I want it to either flash in one state or light up constantly in another state. However, I can't find a pulse generator in the safety Function Block (FB) in Sysmac Studio. Do you have any tips or suggestions on how to achieve this? Kind regards, An Apprentice
-
Hi, I have a reset button for a safety function, and I want it to either flash in one state or light up constantly in another state. However, I can't find a pulse generator in the safety Function Block (FB) in Sysmac Studio. Do you have any tips or suggestions on how to achieve this? Kind regards, An Apprentice
-
I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I