Search the Community
Showing results for tags 'nx1p2'.
-
Hello! I am trying to do first serial communication VFD control with PLC. (NX1p2) I read and learned that CiA402 is "standard" for ethercat control, is there any reason to use something else, or is CiA402 way to go? What Fb should i use for VFD control, or should i make my own? Is there any library for VFD control? Thanks for help!
-
Hi, I am trying to use CIPUCMMSend FB, but when it's executed, nothing happens. I would be happy if I had an error code or something to work with. I succesfully established an implicit connection with the same device and it's working fine. I don't understand since every input value of the function block seems fine and the ethernet port is ready. Has anyone had this issue ? I'm really confused as why it's not executed. My PLC is a NX1P2 and I am using Sysmac Lite ver 1.60 I'm sorry if it is obvious, it's my first time using this block. I searched here and some place else, but I could not find any answers. Thanks,
-
Hello I have project where I will be use EXLAR roller screw and UNIMOTION ball screw actuator like FTP, PNCE for module of servo press with controler NX1P2 and serwo 1S. I started instaled SYSMAC XR-013 Servo Press Library (https://www.ia.omron.com/data_pdf/cat/sysmac-xr013_p112-e1_2_3_csm1052873.pdf?id=3459) I have completed, connected and launched an evaluation kit containing a 1S drive and motor, an NX1P2 controller, a PNCE mechanical actuator with a force sensor. Does anyone have experience using this library? I am trying to use it, but the OMRON documentation for this library lacks explanations and configuration examples. I am ready to connect online (e.g. Anydesk) to launch and test some of its functions with someone who knows this library. WBR, COVIS.PL
-
I made an Ethernet connection between an NX1P2 and a CJ2M using network configurator and I already have a real-time data input and output connection in the memory of both plcs. I need to send a 20-byte word and when the NX1P2 is modified in the CJ2M using Sysmac Studio, it receives that string of bits, decompresses each bit to be able to activate the NX1P2 outputs.
-
Can someone please help me figure out how to create a 12 hour long timer function in Sysmac? Or at least help me determine which timer function (in any) is best suited to create this long of a timer? Or will this require a counter instead? If so, does anyone have an examples on how to go about this? I'd like this timer to start it's function when powered up, and after the 12 hour timer is finished I will have it open a certain page on my HMI. Thanks!
-
Hello, Is there any easy way to make "HMI like webserver" for omron? I did not even found any examples how to make one. wago have very easy way to make webserver for your project. ( https://www.youtube.com/watch?v=xjK9UNWqeEA ) Engineers need to use Hmi rarely, so webserver would save money. Every service engineer have laptops, but are not familar with plc, so we can't give them sysmac studio. Feels stupid to change brand because we have allready used NX1p2 in many other applications. Is there any 3rd party options for webservers? Thanks for answers!
-
I am trying to use two different Keyence measurement devices but it won't let me use both of the ESI files (that are different files). Which every I import first either the TM-X5000 or the LJ-X8002 it will work but when I attempt to bring in the second device I get an error saying "that ESI file already exists" and won't allow it to be used. I've attached the two ESI files I am attempting to use that were downloaded from the Keyence website. I am using an NX1P2-9024DT1 controller and running Sysmac Studio ver 1.52 ( I know this is out of date but I cannot connect to the update server due to my works network security). Downloads_20240129_232701.zip *edited to add actual error message code* "- The same slave exists in the installed ESI file. Please uninstall it and try again. Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Parameter 128Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Parameter 256Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Parameter 32Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Parameter 512Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Parameter 64Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Result Data 128Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Result Data 256Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Result Data 32Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Result Data 512Byte) Keyence TM-X5k_CB-NEC20E.xml(Installed : Keyence LJ-X8k_CB-NEC20E.xml - Result Data 64Byte)" -
Hello everyone, new to this forum! I'm asking for advice on the synchronization between a rotary and a linear servo. Let's say, if the linear motor moves 20 mm the rotary one should turn 10 times (3600 degrees). It's a very similar situation to this thread. So there's 2 points to consider: 1. Can I perform linear interpolation if the rotary motor is working with modulo (from 0° to 360°)? How should I write the MC_MoveLinear parameters in order to achieve that with more than one turn, that is, target position beyond the modulo range? 2. I've also considered using electronic gearing, which would make my life easier with calculations, but if there's any type of delay between the servos (aka catching phase of the MC_GearIn) it could result in tool breakage. Is there a way to use electronic gearing while guaranteeing both acceleration and deceleration stay in sync? The CPU I'm working with is the NX1P2-1040. Any advice is appreciated, thanks in advance! -
¿Alguien sabe cómo crear un puente entre un plc nx1p2 y el escritorio de una PC para crear, abrir, cerrar o eliminar archivos txt o cualquier otro?
-
Hi, we have one PLC that throws many errors on task period exceeded. checking the status, this warning have come over 15000 times since when ever it started couting it. Max cycle time is 2.83ms while max allowed task is the default(?) 2ms. We think it has something to do with the block for the barcode scanning. this blockas around 134ns cycle time when it seems normal, all other blocks is around 4-8 ns. How can we make sure what part that sometimes exceeds the 2 ms execution time?
-
Hi. I have this project to rewrite the code for a station of several machines. Currently i tried to run the simulation with the CPU NX1P2-9024DT1, Unit version 1.8. Why does this error arrive? I Run Sucky win11, Sysmac v1.52
-
Hi, I'm developing an application in C# and need to communicate with a plc omron NX1P2. How can i do it? With cx-compolet? Or is there another way?
-
Hello! Is there any FB for average value calculation? I did add Value to int every secend and devide it value by passed secends. Only problem is that by the time goes on int will be full?
-
Hi: Has anyone use Fins Command with NX1P2 (or any NX/NJ). I try with Multiway with "[!]: Command format error (1004)" Below is the command from multiway 800003000100000100060101820001000003 Data memory are define in global variable table as A as %D1, B as %D2 and C as %D3. The relevant setting are done on Fins Setting and Memory Setting in the PLC. Anyone ?
-
I am trying to get a G9SP taking over serial to a NX1P2 using a NX1W-CIF01. I have the details in Manual P545-E1 and it uses a example file which i am unable to locate OMRON_G9SP_SERI232_LD_EV100.SMC I have got the coms working with a CP1L using the example in Manual Z922-E1. I was wondering if anyone has the example file or a working example they can share for Sysmac Studio. The serial comms will take a little bit to get going but it is the code for the checksum for the sending data that i would rather not have to translate from CX Programer fort he CP1L to Sysmac Studio...... P545-E1-01.pdf.lnk Z922-E1-07.pdf.lnk
-
Hello! I have problem with nx1p2 SIL/pl rating. crane standard says, system have to be atleast (EN ISO 13849) PL D or (IEC 61508-1) SIL 2 rated. Did not found answer from the manual or google. Full Safety rated system is too expensive for this application. Long story short does anyone know SLI rating for nx1p2? Is there any SIL 2 rated cpu's?
-
Hi! I am new to plc-programming and i need few tips to finish my first project question 1: What is best way to convert bool's, lint, time and real into array? question 2: What i need to have for transferring that array into company's Http/web and how to do it? modem? Thanks for helping! -
Hi, I have to implement an axis control in a NX1P2 PLC using an inverter (3G3MX2) and an encoder cabled on a EC0122 board. I found something similar implemented on a CJ2M PLC, but I have no idea how to set up the axis in the configuration of sysmac studio and how to implement the control. Can someone help me? Some sample to catch out the configuration? Thanks a lot Andrea
-
Hi All, I am a new user to this Forum and definitely a newbie PLC user, so I'm not sure if this is a simple mistake. I am currently trying to correct the logic (of a sensor) on a PLC program to get a manufacturing machine back up and running. This is an issue that I have fixed via PLC several times previously, but for some reason I am having issues fixing it this time. The issue that I am having is that when I try to dig into the Logic of the PLC program (Programming > POUs > Programs > Logic > ...), nothing shows up where there is typically a PLC command ladder. I get the error "No instruction in rung" next to all of the PLC program modules. I am connecting to a Omron NX1P2 CPU via laptop & Ethernet cord. To give you background on my troubleshooting process, I have verified that the I am connected to the PLC controller, by using the Windows Run program to ping the IP address of the controller. After verifying connection, I attempted to connect to the controller using SYSMAC studio. At this step, a troubleshooting window appeared with the issue "Minor fault" "Tag Data Link Connection Timeout". When I look at the Controller Status at the bottom right corner of SYSMAC, it says that I am online and connected to the correct IP address (green circle). Under that, ERR/ALM has a red circle next to RUN Mode. Ignoring the troubleshooting window, I can click Synchronization and "Transfer from Controller". A dialog box pops up and reads "...Controller does not have the POU program source...". Pressing yes to ignore this, the transfer completes. This is where I encounter the issue of having nothing show up within the path of Programming > POUs > Programs > Logic > ... . I have a feeling that this is a connectivity or settings issue, but I am not sure. I have checked my ethernet splitter (D-Link DES-105) and everything seems to be connected and working. If anyone has some insight into this issue I would greatly appreciate any help. Thank you in advance! Best cszikszai
-
Hello, hardaware: NX1P29024DT1 (ver1.18), frequency inverter Altivar ATV320U07M2B (ver. 2.7 IE32) and communication EtherCAT card VW3A3601 I have a few ESI files v.109, 111, 113, 114 instaled in Sysmac Studio in ESI Library. I can not establish connection between NX1P2 and ATV320 by EtherCAT. In Network cofiguration I add slave with Node Address 2. The same Address is in ATV320 (ECAA and ECSA - parameters). When I connect both I see "Network Cofiguration Verification Error" Code 84220000 and black cross on diagram "Not matched" in Sysmac Studio. On the communication EtherCAT card in Altivar LED1 Green Filickering (Link, activity) but LED2 is OFF (EtherCAT state: INIT). I see in Altivar that parameter ECSS (EtherCAT slave status) INIT. If any one have experience with connection by EtherCAT NX/NJ with ATV32, 320, 340 ? p.s. The same communication EtherCAT card VW3A3601 I use for communication the same NX1P2 with serwo Lexium32M, of course with the appropriate ESI file for this slave and comunication is OK. -
Hello, i am a novice when it comes to PLC programming so i was wondering if i could get some help designing a ladder circuit that allows me to control the speed of a motor connected to a VFD from my HMI. the components i am working with are as follows, NX1P2 omron PLC (with a few digital input & output cards), NA5-7 (V1) omron HMI, and a yaskawa GA500 VFD. Essentially i have a customer who would like to view and make adjustments the speed of a group of VFD's from their HMI located on the main control cabinet. I would like a little help designing the circuit within the controller (If at all possible) or maybe a bit of guidance as to the type of functions i can use to get the desired results. any and all help is much appreciated, thanks
-
I'm trying to allocated an addresse using AT for an array [0..227] in order to reach the values inside of it using HMI via fins, Sysmac studio return the following error message when i try to use E0_0 as mentionned in this thread : the specified zone does not exist in the memory used for the CJ series cards. The only memory location that sysmac accept for me is in the form of %d0, if that's the only option, how can i call the different values inside the array via fins using this AT ?
-
Dear All. can you pls advise me how to communication NX1P2 with G9SP over Ethernet option board - CIF41. thank you. -
Hi everyone, To explain the problem a little bit: I have 2 systems that are equal, they have 1 PLC, 1 Inverter and 1 Servo Axis (Image01). The devices are connected via EtherCat. The thing here is tht in these systems the PLC and Servo Axis is the same but the inverter is different. My goal is to have the same project on both systems and depending on the inverter detected use the correct program. What worked: If I add the 2 Inverters and 2 Servo Axis on the project on different nodes (Image02), I can detect which is present using the variable _EC_EntrySlavTb[n]. My issue is that if I want to make more replicas of the systems using different inverters I will eventually hit the Axis Number limit for the PLC while in reality I am only using on Servo Axis at a time. What I wanted: I would like to be able to control 1 Servo Axis with 2 different inverters (only one active per PLC) (Image03). What I tried: The axis parameters can be set using a variable of the type _sAXIS_PARAM, however it seems that the option to change the axis basic settings is not available (Manual: NJ/NX-series Motion Control Instructions Reference Manual (W508) page 5-58) (Image04). The axis basic settings is where the definition of the output device plus control words are set (Image05). Is there a work around to solve this issue? I would really like to avoid having to manually change the output device for the Servo Axis every time I make an update on all the systems. Best Regards, BR
-
Hello people! I'm using a NX1P2 controller combined with a CIF105 serial card installed on it. For my project, I get some data that are in ASCII form and I want to keep that form when are extracted in a .csv file. I have established the communication for getting the data but, the problem is that I cannot extract the data in the ASCII form. Data extraction comes in Hex form. I use the NX_SerialRcv instruction for the communication and the AryToString conversion for the data. When using the Watch Tab Page I can display the data in ASCII form but, as far as I understand, this is only for online monitoring. I went through topics here and OMRON manuals for finding any Hex to ASCII conversion instruction but the only info I came across was for CX controllers which cannot be implemented to NX controller. Is there any similar instruction for NX controller or I should create a new Library for the conversion? Any tips and/or a sample would be highly appreciated! Thanks! Man31
