Search the Community
Showing results for tags 'simatic'.
Found 14 results
-
I have the following for sale, Automating with Step7 in STL and SCL (S7-300/400 controllers) 6th Edition 2012, Very good Condition Automating with Step7 in LAD and FBD (S7-300/400 controllers) 4th edition, New Condition in plastic Automating with SIMATIC (Controllers, Software, Programming data Communication, Operator Control, and Process Monitoring), 4th edition 2009, Excellent condition Automating with the SIMATIC S5-135U, 3rd revised edition 1993, Very good condion. Located in USA. Make offer, I cover shipping. Pictures available on request, send email address in a PM. Update 07 March 2022, still for sale. -
Hi every one, One of my machine i have to fix , has simatic pc unit installed that causing too much trouble and client want to replace it with simple pc with additional profibus card installed in PCI slot, is there any way to configure image of simatic pc in new simple pc
-
I have a Siemens HMI 6AV2 124-0MC01-0AX0 in my machine. I want to clone the display on the HMI to PC/Laptop. My question is: 1. What software that I need for this task? 2. What kind of interface that I need between the HMI and PC/Laptop (for example ethernet cable, etc)? 3. Do I need to communicate with PLC connected with HMI or can I just connect with the HMI? Thanks in advance for the answer.
-
Siemens Field PG M3 - PLC Programming Rugged Laptop for Sale Condition is Used This is a Siemens Field PG for PLC Programming. Purchased several years ago as part of an auction lot and has sat in my workshop since, I don't do much Siemens so this is up for sale - This is what I know about it :- The machine has Windows 8.1 Pro 64 bit installed (Machine has Windows 7 Ultimate on the base but been upgraded at some point) 8GB ram installed It has a windows XP VM installed which runs the Siemens Programming software (Virtual Box) There is a folder on the desktop containing the original installation files, so would be easy to return back to the host machine if required. All software appears to be licensed (see pics) Has Step 7 and Step 5 installed Negatives - Missing the back flap & Battery not being recognised thus not taking on charge (I think this is a just BIOS update needed but not looked into it too much) In very good overall condition, a few light marks but that's about it, still looks very good. Comes with the original branded rucksack This was a really expensive bit of kit in its day and still stands up as an excellent PLC programming machine Open to sensible offers - I am located in the UK so worldwide postage will have to be calculated seperately I have powered it up and it works well with no issues found, the PLC software all seems to work and appears fully licensed but as I am not the original owner and don't know the provenance of the machine or licenses this machine is sold with no returns or warranty provided.
-
Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require. At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?
-
Hello, I need to make an ethernet communication Siemens S7-300 <> Omron G9SP. The HW of the Siemens that i us are CPU 315 2DP and CP 343-1 Lean. I did try to follow the Omron manuals Z922 and Z924, but faced with some problems. First of all in Z924 there is no complete HW configuration of Siemens (communication configuration is missing). Also, formats of messages differ in both manuals. Maybe there is an Simatic Step 7 project example, that i could open with Simatic Step 7 manager to do a deeper investigation, or maybe somebody has a lot more experience in this case? Thank you in advance. WBR @rturas
-
Hey there Seimens experts, I have a few little S7-200s and need to backup the program on them. What software and cable do I need. I also have a few Micromaster 440s that I can back up too if the cable and software is not to much dollars. Thanks in advance,
-
I am currently trying to set up an IM308c Profibus DP Module to use with an S5-135U system using two 928B processors in Multiprocessing mode. Module will only be accessed by one CPU and the slave is an ET200M (IM153-1). I am testing it along with the Standard Function block FB192. When I execute to write outputs(WO) I get an error. The error is a value of 4 and in the ET200M Manual states "Incorrect Mode" (page 7-15) The remedy is switch the master to run. It is already in run with a green run light on. Does this card require synchronization like Sinec L2? PLC does not see it in run apparently and I have no other info.
-
Thank you for helping my channel https://www.youtube.com/channel/UChdTzYTTKTLjTBa6GK81gFw
-
Finding Free brands through cross-references Step7 to know what areas we have free memory in the project and use them without any overlap problems Memory Step 7 project. Read more at http://www.tecnoplc.com/referencias-cruzadas-step7-marcas-libres/ Greetings. _________________________________________ PLC programming and HMI www.tecnoplc.com
-
Installing USB touch screen on SIEMENS MP377 "12 Touch panel
psolomein posted a topic in HMI & SCADA
Hello Everybody, We have a damaged touch screen that doesn't work anymore (on SIEMENS panel: MP 377 "12 Touch). We also have a replacement touch , however it has 4-pin connector and works through USB controller (USB ETP-4500UG Touchscreen Controller). The drivers for that controller are available, however they are supposed to be installed during building of the OS (WinCE 5.0). We have managed to install this drivers to the panel (copying dll's to \Windows directory and manipulating windows registry). We achieved that touch screen communicates with its own configuration program on the panel (calibration, drawing test are performed correctly). However it works only within this program. So we couldn't move mouse when we are out of the program e.t.c.. So the question is how we set the USB touch as an input device? Which changes shoud we make to the registry? -
I recently purchased a s7-1200 starter kit, a sm 1278 io-link modula and a io link linear sensor from turck. Un until now everything is installed and the sensor is cofigurated. Now the queastion is how do i get the value from the sensor into a tag in a datablock? As you can see in picture tia4 I started to fil in the device block but I could'nt figue everything out. (I am failry new to tia portal) With kind regards Dominique Hautekeete
-
simatic.docx
-
Hi all, I'm using S7 graph and I would like to be able to jump to a step after a warm restart of the PLC. This is to be able to carry on from the step the sequence was in before the restart. I have figured out that I can select a step in Manual mode. So if during the warm restart I pulse a bit for the input to SW_MAN then Load an INT value representing the S_NO before the restart into S_SEL and then pulse another bit into SW_AUTO. Will the sequencer carry on like normal in auto mode from the selected step?
.jpg.ab4bdacbd75415ee4a44ee0400895a6a.thumb.jpg.83cdde1f1a77c9aa8bca447d6c02783b.jpg)
