Miguel.itlac
-
Posts
32 -
Joined
-
Last visited
Miguel.itlac's Achievements
-
Hi @BobLfoot, Yes im trying to find the End position but only when there is command tolerance, because without Command Tolerance i know the end Positon is Exactly what i set in the Instruction Therfore I can use the above Formula, but if set command tolerance my X2,Y2,Z2 Changes so i cannot calculate the Distance.
-
Hello Everyone Im working with Coordinated Motion instructions, specifically MCLM instruction and I Would like to know if there is a way to know the exact End position (XYZ) when parameter Command Tolerance is Set since i need to calculate the distance to the end point, there is no problem as long no command tolerance is set cause I can find the distance using AB=Sqrt ((x2−x1)**2+(y2−y1)**2+(z2−z1)**2) but as some points have command tolerance the X2,Y2,Z2 are unknown. Hope I was Clear Thank you in Advance.
-
thank you very much Guys, @Gambit was correct, same issue.
-
Hello everyone Im updating a HMI with GT designer, the problem occurs sometimes when i try to save the new changes it display the pop up notification that i have attached, therefore i cannot save my changes and i must start over, what is pretty frustating because once i do it again and save it there is no problem. Does anybody know if im doing something wrong? the application was created with melsoft Navigator, what it seems to me being the problem not a fan of mitsubishi... Thank you in advance
-
yes it solves the ROM side, but i still have shortage in the RAM, this GOT has 80 MB
-
Hello Everyone I have an issue with a Got 2000, im updating and adding some screens in a old HMI application with size was about 47 MB, as im still updating i wanted to test the application which now sizes about 52 MBbut is not possible due to the shortage of ROM and RAM, what can I do in this case as the application must be in the built-in Flash memory which is very limited? Thank you in advance
-
Which is the Example program?
-
Hello Everyone, I have a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2 in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
-
Hello Everyone, I have a GOT200 where im using a single Faceplate for 9 inverters in my channel 2, and in my channel 1 I got 3 PLCs, I try to use the Switching Station Function only for the channel 2 in a buttton, my problem is that I can only connect to 1 inverter , when I press the buton the switching station device value changes, but it remains in the same inwerter which is the Host, can someone give me a light on this? thank you in advance
-
How create global objects for many devices (GT Designer 3)
Miguel.itlac replied to scada_vn's topic in Mitsubishi
Hello everyone Is it possible to use this multiplexing function (Offset) connecting a GOT2000 to my drives directly? I ask cause my drive's Faceplate uses I/O like X0001, Does anyone have any idea of how to implement it that way? Thank you in advance. -
okay thank you all guys for your support
-
one more question is, when all communication is set up, how do I get the data, i mean if i send a value in my RCPU in D0 to the FX5UC will i get this value in same Device? How is the mapping in this Case? once i did it with a weintek HMI and i Read memory devices Ms from 8193= M0 so i Wonder if its the same when modbus is implemented.
-
I actually have a FX5UC with only the modbus TCP connection module in the Ethernet configuration without any library or FB and i can write with a modbus View TCP tool so no problem to this point, but my RCPU will be my Client and is not possible to add a Modbus TCP connection module as in my FX5UC, so to this CPU I added the Client library MEU+RCPU_ModbusTCP_00B, added and active connection module pointing to the IP and port of my FX5UC and configure the client FB to talk to my Fx5UC is that correct?? My conclusion is then, that the MODBUS TCP connection module works only as a server am i Right?
-
yes i understand that, but there is another system where modbus tcp is implemented, and there must be communicating each other
-
Yes sorry, I mean FX5CPU, im New with Mitsubishi software etc, but i know that the simple communication is the easiest, but my boss told me that with modbus is easier and i actually dindt catch the whole idea maybe someone can explain it better here. thank you in advance
