vasekd
-
Posts
59 -
Joined
-
Last visited
-
Days Won
1
Recent Profile Visitors
4,933 profile views
vasekd's Achievements
-
Thanks a lot
-
In the last update of Sysmac Studio (1.55) I would like to turn off the feature, see image. Can you help me?
-
The problem is probably caused by the language version of windows. Use 1,0 instead of 1.0
-
There is no need to immediately change a working thing for a new one
-
I have the same message from the Czech OMRON office. We have about 300 NS panels in our plant. Fortunately, the panels are trouble-free except for mechanical damage. The next replacement will be the NB series. But the program needs to be written completely again.
-
Date and time uses internal memory LW10000 - LW10005. Use number input function to these addresses.
-
Profibus-dp parameters cannot be uploaded from PLC.
-
programmer v 9.76 - basic units - fourth
-
For PLC all is set by Dip switch
-
Try to use default serial setting - PLC DIP switch 5 ON. The default settings for the RS-232C port are: host link mode, 1 start bit, 7 data bits, even parity, 2 stop bits, and a baud rate of 9,600 bps. Im using OMRON interface USB - serial CS1W-CIF31. But the price
-
See: https://www.myomron.com/index.php?article=165&action=kb
-
You need to use original omron serial cable (or make it) from converter to PLC due to non standart pinout (see chelton message)
-
Yes: https://www.myomron.com/downloads/4.Products/NS%20Firmware/NS_V8.65/HowToRecoverUpdate_Eng.pdf
-
You have to buy new CF card (max 1 GB) and use it without any formating (never format this card).
-
Is it really cx-programmer version 9.5?
