Forums
-
PLCs and Supporting Devices
-
- 24.1k
- posts
-
- 60.5k
- posts
-
- 47k
- posts
-
- 34.3k
- posts
-
- 9.2k
- posts
-
- 4.6k
- posts
-
- 3.3k
- posts
-
- 1.4k
- posts
-
- 221
- posts
-
- 42
- posts
-
- 3.8k
- posts
-
- 1.3k
- posts
-
-
Forum Statistics
39.4k
Total Topics191.9k
Total Posts -
Member Statistics
67,352
Total Members3,019
Most Online
-
Who's Online 0 Members, 0 Anonymous, 244 Guests (See full list)
- There are no registered users currently online
-
Posts
-
First thing I would is reach out to your local Rockwell distributor. They should be able to get you in touch with the right folks. About 8 or 9 years ago, we did a re-control of a machine that had an Anorad linear servo motor. Rockwell was able to come up with a motor file to let a Kinetix 6500 drive operate that motor. -
Hello, question like above "Kinetix 5700 or 5500 is posiible to use with 3rd party linear motor?" I need connect with linear motors https://unimotionusa.com/category/89381 With SinCos incremental feedback. If yes, where I find description "how to"? -
Here. this assumes your physical stop button is N/C type so it can be started/Stopped from the I/O or from the HMI -
I am looking to view FTBatch recipe and equipment status in the PLC to be used for data collection and process data monitoring. There has to be a way for the PLC to pull status tags from FTBatch correct? For example, I'd like the PLC to monitor whether a recipe is running or not on an asset / equipment and also be able to pull which recipe it is running. How hard is this? There ought to be an easy way to extract that kind of data from FTBatch into the PLC no? Any recommendations would be much appreciated. Thank you! -
You can't have both a physical output and an address in the AT column, it's one or the other. In your program, turn on 2 outputs, one for the physical and one to share with the NB.
-
-
Upcoming Events